Close

Not a member yet? Register now and get started.

lock and key

Sign in to your account.

Account Login

Forgot your password?

News  // Browsing posts in News

27 Jun

Hawk Valve Adds Graco Chemical Injection Pump Line

Graco has a complete line of pumps for all of your Chemical Injections needs

G-Chem Pumps - DC or AC Series Chemical Injection Pumps and SystemsEase of Serviceability
  • Easy access to the pump plunger and packings
  • Plunger packings can be replaced in 10 minutes or less
  • Three defined stroke adjustment positions
Robust and Simple Design
  • Adjustable fluid packing lasts longer than non-adjustable seals
  • Offered with Chromex™ coated plungers and SST fluid section/wetted parts
  • Proprietary poppet style check valve eliminates valve from sticking
  • Same high quality drive train used on other Graco chemical injection pumps
  Python - Pneumatic Operated Chemical Injection Pumps
  • Ideal for applications that require a pump to operate in an explosion proof environment
  • These chemical pumps run on regulated natural gas or compressed air
  • Uses half the air consumption of other pumps in the market
  • Easy to operate
  • Lowest out of pocket cost
  • Extreme duty plungers, seals, and timing valve are designed for up to two years of operation before replacement
Python XL - Series Pumps With three Merkur® air motor sizes and up to six different plunger sizes to choose from, the Python XL Series pumps cover a wide range of flows and pressure. 2.5" Python XL
  • 2.5” Merkur air motor
  • 7 pump sizes (1/8”, 3/16”, 1/4”, 3/8”, 1/2”, 5/8”, 3/4”)
  • 5 seal materials (HNBR, FKM, FKM-ETP, FFKM, TFEP)
  • 2 plunger coatings (Chromex and ceramic)
  • Maximum working pressure: 11,500 psi (793 bar)
  • Maximum flow rate: 370 gpd (1400 lpd)
  • CE and ATEX approved models
3.5" Python XL
  • 3.5” Merkur air motor
  • 5 pump sizes (1/4”, 3/8”, 1/2”, 5/8”, 3/4”)
  • 5 seal materials (HNBR, FKM, FKM-ETP, FFKM, TFEP)
  • 2 plunger coatings (Chromex and ceramic)
  • Maximum working pressure: 12,000 psi (827 bar)
  • Maximum flow rate: 380 gpd (1438 lpd)
  • CE and ATEX approved models
4.5" Python XL
  • 4.5” Merkur air motor
  • 5 pump sizes (1/4”, 3/8”, 1/2”, 5/8”, 3/4”)
  • 5 seal materials (HNBR, FKM, FKM-ETP, FFKM, TFEP)
  • 2 plunger coatings (Chromex and ceramic)
  • Maximum working: 12,000 psi (827 bar)
  • Maximum flow rate: 380 gpd (1438 lpd)
  • CE and ATEX approved models
    cq5dam.thumbnail.600.600                           cq5dam.thumbnail.600.600 (1)                     cq5dam.thumbnail.600.600 (2)      
 

05 Feb

New Sprague Pump Line

Sprague Air Driven Pumps - Output Pressures to 36,500 PSI          S-216-J
Sprague Power Units - Output pressures to 36,500 PSI          S-440-J-Power-Unit
Sprague Gas Boosters - Output Pressures to 13,500 PSI          Powerstar-4-Pump
Sprague Brochure

15 Mar

JVS Chokes

JVS Flow Control

Hawk Valve is now the exclusive Gulf Coast Representative for the JVS line of standard and severe service application chokes for the up-stream oil and gas industry.  JVS has an extensive product line and the ability to repair / upgrade other manufacturer's chokes at their Houston, Texas facility.
  Positive Chokes / Needle & Seat Chokes / Gas Lift Chokes Plug & Cage Chokes /External Sleeve Chokes / Concentric Cage Chokes / Velocity Control Chokes
 
   

21 Jul

High Pressure Hose

Hawk Valve is now carrying the Reinflex Line of High Pressure Hose

The Reinflex line of UHP Hose is a comprehensive range of fully engineered polymer hoses featuring combination spiral layered steel reinforcement. Each hose family has been carefully developed with custom insert and ferrule designs to maintain the highest integrity of both the components and the final assembly.
 
Ultra High Pressure Hose Features
  • Very high working pressures (up to 40,600 psi)
  • Superior chemical and abrasion resistant covers
  • Resistance to ozone, sea water, UV light, and aging
  • Excellent cut & crush resistance
  • Low volumetric expansion at maximum working pressure
  • Quality system certified ISO 9001:2008 and ISO 14001:2004
 

Reinflex Hose

08 Jan

HiP Subsea Ball Valves

HiP Subsea Ball Valves

High Pressure Equipment's Subsea Ball Valves feature a reliable trunion-style ball design and incorporate the required design modifications for ideal performance in critical subsea systems. HiP offers the industry's widest range of subsea valve sizes. These valves are available in 2-way or 3-way configurations with 180° operation or 90° diverter styles in .187", .375" and .500" orifices and 10,000, 15,000 and 20,000 PSI pressure ranges.